Lets Go Aero NEO2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Wheel Mount
(8 reviews)
Price: $141.79
In Stock
Lets Go Aero NEO2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Wheel Mount
Item # B01748
Retail:$189.00
Our Price: $141.79
You Save: $47.21
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (8)
- Q & A (0)
- Photos
Lets Go Aero RV and Camper Bike Racks - B01748
- RV Hitch Rack
- Motorhome
- Flat-Towed Vehicle
- 2 Bikes
- Childrens Bikes
- Mountain Bikes
- Road Bikes
- Womens Bikes
- Fits 1-1/4 and 2 Inch Hitch
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- Hanging Rack
- Wheel Mount
- Lets Go Aero
- Locks Not Included
This lightweight, V-shaped rack carries 2 bikes of almost any size or style by the wheels - no frame contact. Removable arms let you access your cargo area with bikes unloaded. Breaks down for compact storage in your trunk or garage.
Features:
- V-shaped bike rack carries 2 bikes using your vehicle's hitch receiver
- Adjustable wheel cradles and sway stops stabilize bikes on the rack
- Rubber straps secure bikes to cradles and protect bike wheel surfaces
- Rack arms can be removed to access your vehicle's rear cargo area or for storage
- Cushioned pads prevent bikes from getting scratched or scuffed
- Anti-rattle hitch pin prevents wobbling and noise in trailer hitch receiver
- Adapter sleeve converts shank for use with 1-1/4" hitches
- Hitch lock and cable lock (sold separately) deter theft of bikes and rack
- Sturdy steel construction with black powder coat is rust resistant
Specs:
- Application: 1-1/4" x 1-1/4" (Class I and Class II) and 2" x 2" trailer hitch receivers
- Carrying capacity: 2 bikes
- Weight capacity: 40 lbs per bike
- Distance from center of hitch pin hole to:
- Closest part of rack: 12-1/4"
- Farthest part of rack: 24-3/4"
- Closest part of mast: 18"
- Carrier weight: 15 lbs
- Limited lifetime warranty
V-Shaped Arms
The NEO2 has V-shaped arms that distribute weight evenly, holding your bikes by the wheel, so it won't scratch or scuff the paint. They keep your bikes level and eliminate the need for bike frame adapter bars normally required for mounting women's, children's, and alternative frame bikes on a hanging-style bike rack.
Thick pads on the arms help keep your bikes from banging into the rack and getting scratched.
The arms can be removed for access to your vehicle's rear cargo area with your bikes unloaded. The rack's arms and shank also break down small enough that you can easily store the rack in your trunk when not in use.
Adjustable Wheel Cradles and Sway Stops
The upper wheel cradles adjust independently so that your bikes hang level on the rack. For support, adjust the lower sway stops so that they are flush against the bottom of your tires. To secure your bikes, pull the rubber strap on each cradle and sway stop over the wheel and hook the tightest hole around the peg at the end of the cradle.
Threaded Hitch Pin and Hitch Adapter
The rack includes a threaded hitch pin that helps eliminate rattle in the hitch receiver during transport. The rack also works with both 1-1/4" and 2" hitches. To use it in a 1-1/4" hitch, simply remove the adapter with the included Allen key.
B01748 Lets Go Aero NEO2 2-Bike Carrier for 1-1/4 Inch and 2 Inch Hitches
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Customer Reviews
Lets Go Aero NEO2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Wheel Mount - B01748
Average Customer Rating: 4.5 out of 5 stars (8 Customer Reviews)
This lightweight, V-shaped rack carries 2 bikes of almost any size or style by the wheels - no frame contact. Removable arms let you access your cargo area with bikes unloaded. Breaks down for compact storage in your trunk or garage.by: George02/03/2023
This purchase was to have a rack we can use when we need to bring single bikes in addition to or instead of our tandem. We have used it about a dozen times and it has been a great solution. Easy to store and set up and the wheel mount eliminates any issues with having a horizontal frame member to hang from. We've heavily loaded it several times including wedging our bike trailer between the bikes.
by: Rick 08/18/2023
This is a lightweight rack that holds the bikes horizontal by supporting them by their wheel rims. Adjusting it for various size bikes is easy. Bikes are well protected. There are pinned split-fit joints at the base that may be susceptible to wear after a lot of use.
by: David02/16/2024
Saw a Youtube video and liked this. It appears strong.
by: Howie 08/20/2022
Very light and easy to install.
by: Steven03/31/2023
The person who helped me in the online chat was very good and I decided to call to get more information. The charming lady I spoke to, Alyssa, was really good and after our chat I felt I had enough info to order. It came today and everything was perfect!
by: Ian 08/16/2023
Great selection of products and prices.
by: Patrick W.08/18/2022
This rack was a great fit for carrying my two bikes on the back of my travel trailer. However, two of the four rubber straps cracked within months and the factory considers this "normal wear" and will not replace them. If you plan on keeping this rack for more than a couple of months you need to stock up on spare straps. The factory wants $[XX] for each one but you can buy a dozen on [online] for $[XX].
by: Mike05/09/2022
Since my bikes are full suspension, I needed rack that can hold them by the wheels, and most have trays under the wheels. This is a great alternative and quite a bit less expensive than the tray carry type. It is simple, light, and easy to use.
8
8
See what our Experts say about this Lets Go Aero RV and Camper Bike Racks
- Will Lets Go Aero Bike Rack Fit 2012 Toyota RAV4 that has Rear Spare MountedSince the rear spare on your 2012 Toyota RAV4 is recessed into the rear door of the vehicle it's not an issue for bike rack clearance as we have found. The Lets Go Aero bike rack part # B01748 will fit and work great as long as you have a hitch installed on the vehicle like the Curt # C13149.
view full answer... - Will Lippert Jack-It 2 Bike Rack Fit with Bolt-On A-Frame CouplerI can definitely see where you are coming from. Attached is a photo I made showing the dimensions of the base part on the Jack-It 2 Bike Rack for A-Frame Trailers # LC429756 so you can compare that with the A-Frame coupler on your 2022 Rove Lite travel trailer. If this doesn't work for you then we do have some other viable options as well. We can possibly add a hitch to your Rove Lite using something like the Curt # 13703 along with a bike rack like the Lets Go Aero NEO2 # B01748 or Thule...
view full answer...
- Bike Rack that Will Clear Spare Tire on Back of Motorhome and Fit 2016 Toyota HighlanderFor your motorhome and 2016 Toyota Highlander the LetsGoAero NEO2 # B01748 is a great option. This rack has an extended shank that will help get the rack past that spare tire on the RV. It measures 18 inches for the center of the hitch pin hole to the back of the upright mast on the rack. If your hitch pin hole to spare tire measurement is less than 18 inches then this will work.
view full answer... - Recommended Bike Rack to Use with the Stromberg Carlson Bike BunkI have a great option for you. When using the Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers # CC-275 there are a few parameters you will need to stay within. The bike rack needs to be travel trailer rated, fit a 2" hitch and the combined weight of the bike rack and your bikes needs to be less than 100 lbs. Given these parameters I recommend the Lets Go Aero NEO2 2-Bike Rack # B01748. This 2 bike rack is the lightest weight of the racks that are rated...
view full answer... - How to Carry 4 Bikes on a 2015 Volkswagen Golf SE TDIBoth trailer hitch manufacturers and bike rack manufacturers agree that on a Class I hitch the most bikes you can safely carry is 2. This is because a third bike or more puts the weight too far away from the receiver. This creates too much torque on the receiver, like using a long cheater bar to loosen a lug nut when changing a tire. It can damage the hitch and/or the vehicle. Using an adapter will reduce the tongue weight capacity of a trailer hitch by 50 percent. So on a hitch rated...
view full answer... - Will the Lets Go Aero NEO2 Bike Rack Fit a 2007 Chevy TahoeMy research shows that your 2007 Chevy Tahoe has a 2 inch hitch receiver so the Lets Go Aero NEO2 Bike Rack # B01748 that you referenced will fit your vehicle. One nice feature of this rack is the ability to work on either your vehicle or a vehicle with a smaller, 1-1/4 inch hitch receiver. It also provides over a foot of clearance at the back of the vehicle, great if you happen to have beach cruisers or mountain bikes with wide handlebars. The other items that may be of interest are...
view full answer... - Recommended Bike Carrier To Use Between RV And Towed VehicleIn order to be able to carry bikes between your towed vehicle and the RV you will first need a dual receiver for your trailer hitch. I recommend the Curt Dual 2 inch Receiver Tube Adapter, part # D-192. the bottom receiver is used for the tow bar and the upper receiver has a 2 inch receiver for the bike carrier. Bike carriers need to be RV rated because they are built to take on the added stress at the rear of the RV or motorhome. The carrier I recommend is the Swagman Original, part...
view full answer... - Will Lets Go Aero NEO2 2-Bike Rack Clear the Rear Spare Tire of 2004 Jeep WranglerYou can determine the fit of the Lets Go Aero NEO2 2-Bike Rack # B01311 or any other hitch-mount carrier on your 2004 Jeep Wrangler by taking one simple measurement of its hitch. Measure from the center of the hitch pin hole to the rear-most part of the vehicle, which in your case should be the back edge of the spare tire. The linked article offers details and photos to illustrate this measurement process. Once you know the distance from the hitch pin hole to the back edge of your spare...
view full answer... - Towing a Trailer and Carrying Bikes at the Same Time with a 2014 Honda OdysseyThe Thule T2 # TH83JV will work in the receiver portion of multipurpose ball mount # D210. The issue is that you will likely have reduced turning clearance when towing the trailer and the bikes and/or rack could make contact with the trailer if you were to turn tightly enough. The height of the ball mount is another potential issue. The # D210 has a 2-1/4 inch drop. To determine if this will be a factor there are some measurements you can take. First measure from the ground to the top...
view full answer... - Will Lets Go Aero NEO2 Fit 2010 Toyota RAV4 and Clear SpareWhen we installed the etrailer hitch part # e98864 on a similar Toyota RAV4 we found that it had 3-1/2 inches from the pin hole to the outside of the rear spare tire cover. The Lets Go Aero bike rack part # B01748 would easily clear that without a hitch extender as it has 18 inches from it's pin hole to the nearest upright mast.
view full answer... - Trailer Hitch Recommendation for 2017 Mazda 6 for Carrying Thule T2The Thule T2 you have part number TH916XTR is only a fit for 2 inch hitches and your 2017 Mazda 6 only has 1-1/4 inch hitches available like the Curt # C11356, which would be your best choice. My recommendation is to purchase an economical class I rack like the Lets Go Aero NEO2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Wheel Mount # B01748. This rack will let you carry 2 bikes up to 40 pounds each.
view full answer... - Subaru Forester 2017 Hitch Bike Rack RecommendationFor a bike rack that works well with the shallow hitch pin you have on your 2017 Subaru 1-1/4 inch hitch we have the Lets Go Aero Bike rack part # B01748 that will work well as it is compatible and a great rack.
view full answer... - Will Adding a Trailer Hitch and Bike Rack Affect Gas Mileage on a 2018 Hyundai IoniqDraw-Tite trailer hitch # 24963 weighs all of 20 pounds. The Saris SuperClamp EX # SA4025F weighs 35 pounds. So you could place 55 pounds in your 2018 Hyundai Ioniq's storage area and see if that affects mileage. I believe that it would have a minimal impact if it is even measurable in the short term. The only other option for carrying bikes with this vehicle would be a roof rack and that will definitely affect the mileage. There are lighter bike racks you could use. The Neo2, # B01748,...
view full answer... - Hauling Two Kayaks On A Flat Towed 2021 Jeep Wrangler Unlimited Sahara JL To haul your kayaks on your flat towed 2021 Jeep Wrangler you'll need to install a gutter-mounted roof rack. For this I recommend the following components: Thule WingBar Evo Crossbars - Qty 2 # TH711520 Rapid Gutter Feet for Thule Crossbars - Qty 4 # TH65BJ This roof rack has a 165lb capacity and comes with 60" long crossbars to fit both of your kayaks. A loader like the Thule Hullavator Pro Kayak Roof Rack and Lift Assist w/ Tie-Downs # TH898 can be used to help get the kayaks up on...
view full answer...
- What Bike Rack Options Are There For a 2002 Ford Mustang V6 Convertible with Rear SpoilerYou have a couple different options for a bike rack that will work with your 2002 Ford Mustang V6 Convertible with spoiler. There is the Saris Guardian 2 Bike Rack # SAR93FR which will work with your convertible and spoiler (as long as your spoiler is factory). This is a trunk mount style rack that can carry 2 bikes, weighing up to 35 lbs. per bike. If you are wanting a bike rack that can support a little more weight or one that takes the spoiler out of the equation you can use the Lets...
view full answer... - Does Lets Go Aero NEO2 2-Bike Rack Have a Speed LimitBike racks like the Let's Go Aero NEO2 2-Bike Rack # B01748 don't have specified speed limits but we recommend you stay under the posted speed limit! Also you will want to take it easy on rough terrain or speed bumps. Especially if you have heavy bikes loaded on the rack. I attached a review video for this rack for you to check out as well.
view full answer... - Recommended Trailer Hitch for 2018 Volvo V60For your 2018 Volvo V60 I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 75916. This hitch offers a 2 inch receiver compatible with the majority of bike racks and other accessories. Since you are using this hitch for a bike carrier you will want to make sure the bike rack clears the back bumper. When installed the distance form the center of the hitch pin to the back of the bumper for this hitch is 6 inches so you will want to make sure you select a bike carrier with a distance...
view full answer...
- Trailer Hitch Bike Carrier that is Compatible with Factory Trailer Hitch on 2016 Subaru OutbackYes, there is an issue with the Subaru factory trailer hitch and pretty much all accessories that could fit in it. The pin hole is much to close to the end of the receiver and this does not allow enough of the bike rack shank to fit inside the receiver making it unsafe for that application. The solution is a different bike carrier with a longer shank. I have been recommending the NEO2 # B01748 for this exact reason. This carrier is light weight at only 15 pounds but lacks the locks that...
view full answer... - Curt Trailer Hitch vs. Draw Tite Trailer Hitch on 2017 Toyota Prius Prime for Bike RackThough we haven't had a chance to install the Curt Trailer Hitch # C11473 on a 2017 Toyota Prius Prime, based on my research it will sit at about the same spot as the Draw-Tite Trailer Hitch # 24966 on your Prius, which is approximately 7" from the center of the hitch pin hole to the edge of the bumper. In regards to Stabilizing Straps # 18050, these are no longer required by Curt, simply recommended for some hitches. The Curt hitch isn't beefier than the Draw-Tite, as both are a Class...
view full answer...
- Can 1-Bike Add-On for Inno Tire Hold Hitch 2 Bike Platform Rack Be Used By ItselfI have an excellent solution for you but the Inno bike rack add-on INH306 cannot be used by itself. There is no way to attach it to a trailer hitch. What I recommend is the NEO2 bike rack # B01748. This is a 2 bike rack that you can put just one bike on and it holds the bikes at the wheels. I have included a link to a video review of this bike rack for you.
view full answer... - Bike Rack Recommendation for Front Hitch of Truck with Truck Bed CamperFor carrying a single bike rack on the front hitch of a truck the Let's Go Aero NEO2, part # B01748 would be a great option that for the hitch. No bike rack is realistically going to fit behind your truck bed camper due to it's longer distance between the hitch pin and the rear of it.
view full answer... - Trailer Hitch and Hitch Mounted Bike Rack Recommendations for a 2010 Toyota PriusFor your 2010 Toyota Prius, I recommend the Draw-Tite Trailer Hitch, # 24847. It is a very economical hitch and still has the same weight capacities (200 pounds tongue weight, 2,000 pounds gross trailer weight) than the other available hitches. I have included a link to the installation instructions, and a link to a video installation video below. I recommend carrying no more than 2 bikes when using a Class I, 1-1/4 inch trailer hitch like those available for your Prius because a 3 bike...
view full answer... - Will a Platform Style Bike Rack Fit on my 2006 Honda CR-V With Spare Tire on Back DoorIn order to ensure that a hitch mounted bike rack will fit your 2006 Honda CR-V with the spare tire mounted on the back door, you will need to measure to determine the amount of clearance that you vehicle requires. I have attached a help article which will assist you in doing this. I recommend taking a look at the Let's Go Aero NEO2 Bike Rack, # B01748, which assembles in minutes and the support arms can be quickly removed for compact storage. This rack measures 12 inches from the center...
view full answer... - Trailer Hitch Receiver and Bike Rack For a Flat Towed 2018 Chevrolet Spark to Carry 2 E-BikesThe class I Curt Trailer Hitch Receiver # C11433 with the 1-1/4" receiver is the only size available for your 2018 Chevrolet Spark. There is not currently a 2" custom fit receiver for your Spark. If you were to use the Adapter # HTAD this will reduce the receiver tongue weight capacity in half. So rather than the Draw-Tite receiver being able to support 200lbs it will only be able to support 100lbs. This will likely not be enough capacity for the Thule rack and the 2 e-bikes you will...
view full answer...
Do you have a question about this RV and Camper Bike Rack?
Info for this part was:
Video by:
Andrew K
Video by:
John S
Edited by:
Tyler C
Video Edited:
Jacob T
Video Edited:
Dustin K
Updated by:
Wilson B
Updated by:
Matthew S
Installed by:
Savanna B
Test Fit:
Evangeline M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Howie
8/21/2023
Terrific product.